For Ski-Doo MXZ 440 583 670 1996-2000 H4 LED Headlight Bulb HID White High Power

Description

Store Categories
Store Categories
Scheinwerfer / Forward
Low beam
High beam
Nebelscheinwerfer/Foglamps
Headlights+Foglights
Daytime running light
Side direction indicator
Additional high beam headlamp
Parking light
Cornering light
Tail light / Exterior
Rear direction indicator
Stop lamp
Back-up lamp
Rear fog lamp
Interior light / Interior
Door safety light
Boot light
Reading light
Glove compartment light
Light strips/Accessories
Other
Detail
Product Description:
H4 9003 HS1 CSP-1919 LED Headlight Hi/Low Beam Bulbs
2pcs 9600LM 110W 6000K White H4 Replace Factory Halogen Hi/Low Beam Bulbs
Replaces Bulb Number: 3303-846, 0609-956, 0109-724
Brand: CHUSYYRAY
LED Chips: CSP LED Chips /Bulb (per bulb)
Color Temperature: 6000K Pure White
Lumens: 80000LM /Bulb (per bulb)
Operation Wattage: 110W /Bulb (per bulb)
Operation Voltage:DC 12V-24V
Package Including: 2pcs LED Headlight Bulbs
Warranty:5 Year
Operating Temperature: -40°C ~ +80°C
Lifetime: Over 100,000 Hours
Waterproof Rating: IP67 Waterproof
---2pcs New CSP High Power High Chips Per Bulb.
---Cooling fan design with external ballast
---Built-in Exclusive Constant Current Driver Chip System.
---Small Illuminated Surfaces, Super Bright High Power Chips, Super Condenser, Provide more Uniform and Concentrated Lighting.
---Single Side Beam.High Stability.High Brightness.
---Constant Current Temperature Control System to Ensure the Normal Operation of LED Bulbs.
---High-Performance Protection, Extended Service Life.
---0.1S Instant Light Up.Super Low Load Resistance.Low Power Consumption.
---Excellent Heat Dissipation.Wave Heat Sink,80% Increase in Heat Dissipation than Normal Products.
---6000K White Clear Light Beam for
Motorcycle/ATV/UTV/CAR
Headlight.
---Intelligent Temperature Control.Strong Anti-Interference Performance.
---Optimized Cooling: Cold-Pressed Aluminum Speed up the Cooling Rate to 80%,Ensure Long Lifespan.
---Easy Installation,Plug & Play.
Package Include:
2pcs LED Bulbs
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
After installing the LED bulbs, after a few minutes of lighting,the light is off, flashing,to eliminate the burnout situation,then it needs to be decoded,there are the following solutions
1, need to install the decoder, the decoding rate of the market decoder is only about 90%, the invalidity probability is relatively large
2, install the resistor, be sure to ask the professional to install
3, the dashboard shows the bulb burnt error code or logo, but the bulb can work normally, it needs to be decoded, in addition to the above method, it can also be solved by correcting the ECU/driving computer error code to achieve the decoding effect.
Shipping Policy
Payment Method
Returns Policy
Shipping Policy
Payment Method
Returns Policy
Copyright © 2017 DataCaciques
Home
Payment
Shipping
About us
Contact us
Store Categories
Store Categories
Scheinwerfer / Forward
Low beam
High beam
Nebelscheinwerfer/Foglamps
Headlights+Foglights
Daytime running light
Side direction indicator
Additional high beam headlamp
Parking light
Cornering light
Tail light / Exterior
Rear direction indicator
Stop lamp
Back-up lamp
Rear fog lamp
Interior light / Interior
Door safety light
Boot light
Reading light
Glove compartment light
Light strips/Accessories
Other
DESCRIPTION
Product Description:
H4 9003 HS1 CSP-1919 LED Headlight Hi/Low Beam Bulbs
2pcs 9600LM 110W 6000K White H4 Replace Factory Halogen Hi/Low Beam Bulbs
Replaces Bulb Number: 3303-846, 0609-956, 0109-724
Brand: CHUSYYRAY
LED Chips: CSP LED Chips /Bulb (per bulb)
Color Temperature: 6000K Pure White
Lumens: 80000LM /Bulb (per bulb)
Operation Wattage: 110W /Bulb (per bulb)
Operation Voltage:DC 12V-24V
Package Including: 2pcs LED Headlight Bulbs
Warranty:5 Year
Operating Temperature: -40°C ~ +80°C
Lifetime: Over 100,000 Hours
Waterproof Rating: IP67 Waterproof
---2pcs New CSP High Power High Chips Per Bulb.
---Cooling fan design with external ballast
---Built-in Exclusive Constant Current Driver Chip System.
---Small Illuminated Surfaces, Super Bright High Power Chips, Super Condenser, Provide more Uniform and Concentrated Lighting.
---Single Side Beam.High Stability.High Brightness.
---Constant Current Temperature Control System to Ensure the Normal Operation of LED Bulbs.
---High-Performance Protection, Extended Service Life.
---0.1S Instant Light Up.Super Low Load Resistance.Low Power Consumption.
---Excellent Heat Dissipation.Wave Heat Sink,80% Increase in Heat Dissipation than Normal Products.
---6000K White Clear Light Beam for
Motorcycle/ATV/UTV/CAR
Headlight.
---Intelligent Temperature Control.Strong Anti-Interference Performance.
---Optimized Cooling: Cold-Pressed Aluminum Speed up the Cooling Rate to 80%,Ensure Long Lifespan.
---Easy Installation,Plug & Play.
Package Include:
2pcs LED Bulbs
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
After installing the LED bulbs, after a few minutes of lighting,the light is off, flashing,to eliminate the burnout situation,then it needs to be decoded,there are the following solutions
1, need to install the decoder, the decoding rate of the market decoder is only about 90%, the invalidity probability is relatively large
2, install the resistor, be sure to ask the professional to install
3, the dashboard shows the bulb burnt error code or logo, but the bulb can work normally, it needs to be decoded, in addition to the above method, it can also be solved by correcting the ECU/driving computer error code to achieve the decoding effect.
Shipping Policy
Payment Method
Returns Policy
Contact us
Shipping Policy
1. We are shipping this item to worldwide except some countries. Please check them in "Shipping & Payment" label.
2. Orders processed within 1-2 working days of payment verification.
3. We ship to PAYPAL'S ADDRESS ONLY. Please make sure your PayPal and eBay address is correct. Or not, please correct it before payment.
4. If you have not received your shipment within 40 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
Payment Method
(1). We offer 30/60 days return policy. Please contact us within 30/60 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package.
(2). All returned items should be in the original packaging , return tracking information should be provided .
(3). Buyer is responsible for return shipping cost due to the problem not caused by item quality itself .
Returns Policy
The buyer is responsible for all return shipping including a result of customer error or defective item.
1) If you received an incorrect, damaged, defective, or item not as described, contact us for a partial/full refund or replacement on our cost.
2) If you want to return the item, please contact us within 30 days after package received.
Return products must also be in its original condition: including box, packaging and all other accessories.
Contact us
If you have any questions about transportation, products or services, please contact us before leaving feedback / writing comments or submitting return cases. We'll solve the problem! We always put customers first to ensure your satisfaction.
We will serve you wholeheartedly. Email us and our expert team will quickly diagnose the problem and provide the best solution within 12-24 working hours. All non working e-mails will be replied within 24-48 hours.